USBPGF-S1 Single Channel USB programmablel Anti-Alias Low-Pass Filter and InstrumentationAmplifier for Signal Conditioning in Data Acquisition Systems

USBDR-8

Multi-channel USB and Power Distribution Backplane with 19”rack or DIN Rail Mountable Options for the USBPxx-S1 family

Features

• Power worldwide with universal AC adapter
• DC power from 12V to 50V source
• Install from 1 up to 8 channels per USBDR-8
• Daisy chain USBDR-8 to control up to 112 channels using just one USB port
• USB 2.0 compatible communication
• Synchronize all USBPxx-S1 operation in tracking or dynamic control applications
• Operate on table top, wall mount, rack mount or DIN rail mount
• Optional DIN rail connection kit for mounting the USBDR-8 to DIN rail available • Optional 19” aluminum rack mount plate available

USBPIA-S1

1 Channel USB programmable Instrumentation Amplifier

USBPBP-S1

1 Channel USB programmable Instrumentation Amplifier and Band Pass Filter

USBPHP-S1

1 Channel USB programmable Instrumentation Amplifier and High Pass Filter

USBPGF-S1

1 Channel USB programmable Instrumentation Amplifier and Low Pass Filter

Control multiple USBPxx-S1 devices with one USB link to the host system

Up to eight (8) USBPxx-S1 programmable instrumentation amplifiers and filter modules can be plugged into a USBDR-8. Up to 96 USBPxx-S1 modules can be controlled on a single USB link to the host PC. Each USBDR-8 has an up-link USB port and a down-link USB port. Up to 12 fully or partially populated USBDR-8 can be daisy chained by connecting the first USBDR-8 up-link port to the host and then the down-link port to the next USBDR-8 up-link port in the chain. The SystemViewUSB Windows software will detect and display an individual control dialog for each USBPxx-S1 module when the USB chain becomes active. Once the USBPxx-S1 modules have been configured, the USB links can be disconnected. The USBPxx-S1 modules can operate independently and will remember their settings through power cycles. In environments requiring turn-key system operation, this eliminates the need to provide any USB connections to USBDR-8. Power is the only required connection to USBDR-8 for turn-key system operation.

Power anywhere in the world

The universal AC adapter will convert a 100V to 250V, 50Hz or 60Hz power source to DC power the USBDR-8 where AC power is available. Where AC power is not available, the USBDR-8 can be powered from a DC source as small as 12V up to 50V. This makes the USBDR-8 ideal for powering the USBPxx-S1modules from a land or water vehicle, multi cell battery source ,or solar cell array. A minimum of 1.5A at 24V is required to operate a fully populated USBDR-8.

Mounting Options

Mounting holes are located at both ends of the USBDR-8 enclosure and can be used to secure the USBDR-8 to a table top, a wall, or an aluminum equipment rack panel. Optional DIN rail mounting brackets are available to secure the USBDR-8 to a variety of DIN rail types.


19" Rack Mount Kit	DIN Rail Mount Kit

Physical

Number of channels	1 to 8
Size	338mm(13.3”)x126mm(4.95”)
Power requirement	4A at +12VDC 2A at +24VDC 1A at +48VDC
Operating temperature	0°C to 70°C

How to Order

The USBDR-8 is shipped with the power cord that matches the destination country. If a different power cord is required, it must be specifically identified. The USBDR-8 also includes one set of screw terminal connectors.

Optional Accessories

USBDR-8/DRM	DIN Rail Mount kit
USBDR-8/RMK	19” Rack Mount kit
USBDR-8/STA	Screw terminal adapter kit(one 2-lead STA and two 8-lead STA)
P24V2A	Power Adapter Universal to 12V DC 2A
MMC-NA	Power Cord Plug North America
MMC-EU	Power Cord Plug Europe
MMC-AU	Power Cord Plug Australia

PHONE 949-515-1400 FAX 949-515-4724 E-MAIL productinfo@alligatortech.com